Document Actions
Bus Cable
| Author: | Sébastien Lelong, The SirBot Project, 2006 |
|---|
| Revision: 1.2 | Initial creation |
| $Revision: 441 $ | Convert into REST |
- Abtract
- The Bus Cable is able to connect different boards, using connection specification. No need to think about which wire needs to be connected where, just plug...
Electronic diagram
No diagram, the Bus Cable is just two connectors with wires (in layer). Connectors can be added between extremities.
The following picture describes the connections of the cable, while connected to the Main Board (the bus cable is a way to "propagate" connections from the main board to other module).
Tests
For each pin on one side, just be sure it's connected to the good one (and just one) pin on the other side...
